Before you build the crate, you need to take measurements of the dimensions of what you intend to ship. You can then cut plywood according to the dimensions. Additionally, you’ll need eighth-inch plywood and two by two lumber, which you can find at your local Home Depot. This lumber will serve for bracing inside the container. You can cut the plywood and lumber in the proper size using circular saws and straight edges.

After you’ve cut each of the pieces, match your wood cuts to your plywood. Arrange the lumber around the perimeter of the plywood piece and secure them with glue. Gorilla wood glue is best. After the glue has dried you can hold the pieces with spring clamps , and inch-and-a quarter finish nails.

Work on all the other pieces of plywood and assemble your wooden moving crate, beginning at the bottom plate. If you’re looking to move things that are heavy, use two pieces of wood to form the base plate. It is recommended to make two and use inch Craig pocket screw bits used for the assembly. pta8jir1sb.